![]() ![]() If it comes when you’re driving, then you may get that familiar feeling of rolling backward even though you’re braking. The snap typically happens directly after tensioning the brakes or letting off of them. When your handbrake cable snaps, this is a major issue that needs immediate attention. If you notice any problem at all, then don’t hesitate to bring your car over to the closest mechanic and get the system looked at. If you push down too hard on your car’s emergency brake lever, then chances are good that one or more components in your braking system won’t be able to handle it. It pulls the shoes toward the center of the wheel so they can grip better, and makes sure that your vehicle doesn’t roll anywhere while parked. When you pull up on your car’s handbrake handle, you’re pulling this cable from inside to outside and engaging it against the drum brake. Vehicles have a variety of possible handbrake systems, but most modern cars will have a cable that runs through a tube attached to a drum brake assembly near the rear wheel. You’ve probably heard of a “snap” sound coming from the brake before – this could mean something has gone wrong with the mechanism. It’s what keeps it from rolling away when parked on an incline, and it’s also essential to be able to stop quickly if necessary. The change lever is in a position other than neutral.If you’re a driver, then you know that your car handbrake is the most important safety feature in your vehicle. If the accelerator pedal is depressed with the parking brake applied and all of the following conditions met, the parking brake is released automatically. The brake pedal operation demand indicator light (green) in the instrument cluster turns on. Refer to Message Indicated in Multi-information Display (Search). If the EPB switch is pressed without depressing the brake pedal, the display in the instrument cluster notifies the driver that the brake is not depressed.Ī message is displayed on the multi-information display in the instrument cluster. When the parking brake is released, the EPB indicator light and the EPB switch indicator light turn off.įirmly depress the brake pedal and press the EPB switch. The parking brake can be released while the ignition is switched ON or the engine is running. Refer to If a Warning Light Turns On or Flashes (Search). ![]() The parking brake is applied and the EPB indicator light and the EPB switch indicator light turn on. Securely depress the brake pedal and pull up the EPB switch. The parking brake can be applied regardless of the ignition switch position. When running the vehicle through an automatic car wash, it may be necessary to switch the ignition off with the parking brake released depending on the type of automatic car wash. If the parking brake is applied with the ignition switched off or in ACC, the EPB indicator light in the instrument cluster and the indicator light in the switch may turn on for 15 seconds. When the switch is released, the parking brake is released and the beep stops. If the EPB switch is continually pulled while driving the vehicle, the parking brake will be applied and the EPB warning beep will be activated. The brake pedal may move while the parking brake is being applied or released, however, this does not indicate a problem. When the parking brake is applied and the ignition is switched OFF, an operation sound can be heard, however, this does not indicate a problem. An operation sound can be heard, however, this does not indicate a problem. If the EPB is not used for long periods, an automatic inspection of the system is performed while the vehicle is parked. The parking brake cannot be applied or released while the vehicle battery is dead.Īn operation sound occurs when applying or releasing the parking brake, however, this does not indicate a malfunction. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |